|
Paradigm Shifter is a beat shifting delay mangler with lots of modulation
options. Here's the features in order of signal routing:
-Shifter Section: Shifts the sound in various ways, depending on the
shifter's waveform. When used on beats,the rythm will slow down, speed up
and even have reverse effects.
-Delay Section: The signal is then fed to the BPM synced delay, where you
can limit the delay into distortion.
-Sequencers: Both the shifter and delay are sequenced using two 8-step
sequencers. The shifter sequencer controls the shifting rate and depth.
The delay sequencer controls the delay time and feedback.
-Delay Mixer: The delay is sent to a mixer that lets you choose two delay
times, and then crossfade between them. Though the delay time is mainly
affected by the sequencer, the mixer lets you specify the maximum delay time in seconds.
-Filter Section: The signal is then sent to a filter, which can affect only
the shifter, only the delay, or both. The filter consists of: 2 pole highpass,
4 pole highpass, bandpass, 2 pole lowpass, and 4 pole lowpass.
All of which can be used one at a time, simultaneously, or none at all.
-LFO Section: The LFO section is part of a multi-function panel along with
the sequencer section. This is where you can modulate almost any
parameter with 3 LFOs. Also BPM synced. Each LFO is switchable on/off.
-Panning: Lastly the delay is sent to two panners, one left and one right,
allowing the delay to be centered, or split into left and right panning.
Download:
ParadigmShifter v2.0.zip
|
|